RE-2554 is an UL Listed Microprocessor based conventional Fire Alarm Control Panel which has 4 Zones. These control panels are designed to be used in small and medium sized commercial complexes, buildings, hotels, schools, and industrial establishments. They are compatible with conventional detectors, manual call points and normally open dry contact devices.
☆ Primary Power
120-220 VAC,60/ 50 W
☆ Battery (Lead Acid only)
Charging Current: Constant Voltage 28V @ 0.5A (Max.).
24V DC (2 Nos of 12V, 7Ah (Max.) Sealed Lead acid battery)
System Quiescent Current: 70mA
☆ Operating Condition
Operating Temperature : 0 – 49° C / 32-120° F.
Storage Temperature : 0 – 60° C
Relative Humidity : 93 ± 2% RH (non-condensing) at 32 ±2° C / 90 ± 3° F
☆ Fully complies with UL -864 and NFPA-72.
☆ Rugged CRCA sheet with powder coated finish.
☆ Operates on 110 – 220VAC 50 /60 Hz, AC mains power supply.
☆ 16×2 Dot Matrix LCD display.
☆ 4/8 Class B Style ‘B ‘ or Style ’C’ initiating device circuit (IDC).
☆ All zones accept smoke detectors and normal open contact devices.
☆ Any zone can be configured as alarm or supervisory zone.
☆ 2 Class B notification appliance circuits (NAC).
☆ NAC shall be programmed as silenceable or non – silenceable.
☆ Supervisory zone shall be latching or resettable
☆ Standby (battery) backup 24VDC power supply with built in charger
☆ Standby (battery) backup 24VDC power supply with built in charger
☆ Standby (battery) backup 24VDC power supply with built in charg
☆ Error free Fire / Fault status in unambiguous colored LED indication.
☆ System ON indication.
